11/16 X 4-5/8 BASE CLEAR PINE

Actual: 11/16 in. x 4-5/8 in.

Clear pine base moulding covers the joint between the wall and the finished floor and gives a room a clean, finished look. Clear pine is an appearance grade with few knots, commonly used for interior trim that will be stained, clear-coated, or painted. It cuts, nails, and sands cleanly with standard trim tools. Sold by the linear foot. For interior use. Fasten into studs or plates with finish nails, and cope inside corners for a tight fit.

Key Features

• Actual: 11/16 in. x 4-5/8 in.
• Clear pine appearance grade for stain-, clear-, or paint-grade interior trim
• Covers the wall-to-floor joint as baseboard
• Cuts, nails, and sands cleanly with standard trim tools
• Sold by the linear foot
• Interior use

Lumber Grades and Definitions

• Clear pine: an appearance grade with few knots, used for interior trim

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood

Specifications

• Application: Baseboard / wall-to-floor joint
• Category: Base
• Interior/Exterior: Interior
• Material: Clear Pine
• Thickness: 11/16 in.
• Unit of Sale: Linear foot
• Width/Height: 4-5/8 in.