1X3-16 C&BTR FJ PRIMED PINE

This 1 in. x 3 in. x 16 ft. board is C & Better finger-jointed pine with a factory primer coat. Finger-jointed primed pine is made from shorter lengths joined end to end and is intended for paint-grade trim, fascia, and similar work. C & Better is an appearance grade used where a cleaner look is wanted. The primer is a base for a finish paint coat, not a final finish. Fasten into framing, set nails, and prime any fresh cuts before painting.

Key Features

• Nominal 1 in. x 3 in. x 16 ft. C & Better pine
• Finger-jointed and factory primed for paint-grade trim
• Appearance-grade C & Better for a cleaner look
• Primer is a base coat; apply finish paint after installation
• Prime fresh cuts before painting
• Sold as a 16 ft. piece

Lumber Grades and Definitions

• C & Better: an appearance grade used where a cleaner look is wanted
• Finger-jointed (FJ): shorter lengths joined end to end
• Primed: factory primer coat, not a final finish

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood

Specifications

• Finish: Primed (factory primer)
• Grade: C & Better
• Length: 16 ft.
• Material: Pine (finger-jointed)
• Nominal Dimensions: 1 in. x 3 in. x 16 ft.
• Paint or Stain Grade: Paint grade
• Species: Pine
• Unit of Sale: Piece