2.0E 1.75" X 9.5 X 8 LVL

This 2.0E laminated veneer lumber (LVL) member is marked 2.0E and measures 1-3/4 in. x 9-1/2 in. x 8 ft. LVL is made of wood veneers laminated under pressure into a structural blank, and is commonly used for beams, headers, and similar load-bearing members. 2.0E refers to the modulus of elasticity marked on the piece. Confirm the size, grade stamp, and required design values with the project specifications and the stamp on the member. Do not cut, notch, or bore LVL except as allowed by the manufacturer and the design.

Key Features

• 2.0E LVL, 1-3/4 in. x 9-1/2 in. x 8 ft.
• Laminated veneer lumber for beams, headers, and similar members
• 2.0E modulus of elasticity as marked
• Confirm design values from the stamp and the project specifications
• Do not cut, notch, or bore except as allowed by the manufacturer and the design
• Sold as a single 8 ft. piece

Lumber Grades and Definitions

• 2.0E: modulus of elasticity as marked on the member
• LVL: laminated veneer lumber, an engineered structural wood product

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood

Specifications

• Depth: 9-1/2 in.
• Grade: 2.0E
• Length: 8 ft.
• Material: Laminated veneer lumber (LVL)
• Thickness: 1-3/4 in.
• Unit of Sale: Each